pentaerythritol mini flow sensor

  pentaerythritol mini flow sensor  

email: porter@microflowmeter.com  Shanghai JSNMicro Flow Meter CO.,LTD was founded in 2011 by Mr. Stone. It was just the openingof flow meters with high quality and high-end flow equipments. Our mainproducts are mirco flow meter,oval gear flow meter ,coriolis mass flowmeter,electromagnetic flow meter,piston flow meter,spur gear flow meter,gearpump,gear metering pump. Our delivery is within 3-7working days. If you havespecial requirments, we can customize for you based on your parameters and thedelivery time is about 3-4 weeks.In order to guarantee the after-sell services, we cancled our agency and keepclose contact with our client and market of flow meters



pentaerythritol mini flow sensor

At presentdomestic Oval gear flow meter structure is complex, bulky, bulky, noisy, smallscale, not suitable for low viscosity liquid, the market is more common withDTO series and OGM series. For these problems the country has been unable toovercome, while the Shanghai JiShen instrument Instrument company oval gear Ovalgear flow meter does not have the above problems, such as the same DN25caliber, our model CX-M25-AL, flow range: 0.5 ~ 100L / M, range of 1: 200 orhigher, and weighs only 1.5KG , While the DTO-25, the flow of 600-6000L / H,range ratio of only 1:10, the weight of up to 23KG. All this due totechnological breakthroughs, our chief engineer Tu workers, he is a formerSiemens senior engineer, the use of equipment It is also Siemens CNC MachiningCenter with cutting accuracy up to 0.001mm, which ensures that we produce highquality flow meters.

Ovalgear flow meter is a new type of volumetric flowmeter, in addition to apositive displacement flowmeter with high accuracy, the flow is not sensitiveto other advantages, there are the following advantages: Wide range, usually inthe flow meter is 10: l, and Deep flowmeter is generally 100: 1, or even 1000:1, the accuracy is still above 0.5%, suitable for high pressure flowmeasurement, the maximum pressure can reach 100Mpa, especially suitable for themeasurement of small flow, the minimum measurement limit can be 0.3ml / min ,Less affected by the viscosity characteristics of the medium, suitable for flowmeasurement under various viscosity conditions.



pentaerythritol mini flow sensor

The ovalgear flow meter"s metering principle is the same as that of a generalvolumetric flow meter. The gears mesh with the fluid to be transported. Thefluid to be measured enters the chamber through the oil inlet and pushes therotor so that the fluid is continuously divided into the same volume of fluid.Oil port output. For every one rotation of the rotor, the flowmeter outputs thesame volume of fluid in the four metering chambers in the figure. By measuringthe number of revolutions of the elliptical gear rotor, the volume flow throughthe fluid can be obtained.



pentaerythritol mini flow sensor

Technicaldata of CX-M Series micro oval Oval gear flow meter

Model	Flow  range	Accuracy	Connection  size
CX-M2	0.5~150ml/min	0.5%	G1/8"
CX-M3	3~300ml/min	0.5%	G1/8"
CX-M5	5~1000ml/min	0.5%	G1/8"
CX-M6	0.5~100L/H	0.5%	G1/4"
CX-M9	6~600L/H	0.5%	G1/4"
CX-M12	0.3~30L/Min	0.5%	G1/2"
CX-M25	0.5~100L/Min	0.5%	G1"

What are the precautions for the gear flow meter? Instrumentation expert tells mirco flow meter to clean the pipeline before installation. If the liquid contains solid particles, a filter must be installed upstream of the pipeline; if the gas is contained, the mirco flow meter should be installed without the requirement of a straight pipe section. It can be installed horizontally or vertically, if the direction is uncertain, we also Can be customized universal, such as the use of the robot arm. In general, ordinary flowmeter, if the measured viscosity or flow of the medium is too small, the general instrument is easy to leak, the accuracy can not be guaranteed, and this is precisely our advantage. Therefore, the base flow meter can meet the needs of most customers.